BGRBD - TURCO 5805
- MSDS: BGRBD
- Manufacturer: TURCO PRODUCTS INCORPORATED
- Product Name: TURCO 5805
- National Stock Number: 6850-01-231-8677
Product Identification
Product ID:TURCO 5805
MSDS Date:06/16/1987
FSC:6850
NIIN:01-231-8677
MSDS Number: BGRBD
Responsible Party
WESTIMINISTER, CA 92684-3600
US
Emergency Phone: 614-387-6200
Info Phone: 714-890-3600
Cage: 0BYN5
Contractor
Telephone: 614-387-6200
Cage: 1JD46
Ingredients
SODIUM HYDROXIDE (SARA III)
CAS: 1310-73-2
RTECS: WB4900000
Fraction By Weight: 3%
OSHA PEL 2 MG/M3
ACGIH TLV: C 2 MG/M3; 9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
2-BUTOXYETHANOL
CAS: 111-76-2
RTECS: KJ8575000
Fraction By Weight: 2%
OSHA PEL S, 50 PPM
ACGIH TLV: S, 25 PPM; 9293
HEXYLENE GLYCOL
CAS: 107-41-5
RTECS: SA0810000
Fraction By Weight: 2.5%
OSHA PEL C 25 PPM
ACGIH TLV: C 25 PPM; 9192
NONYL PHENOL POLYETHYLENE GLYCOL
CAS: 26027-38-3
RTECS: MD0906000
Fraction By Weight: 1.5%
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:SKIN/EYE: CONTACT WITH PRODUCT OR
PRODUCT SOLUTION WILL CAUSE SEVERE BURNS, POSSIBLE PERMANENT TISSUE
DAMANGE AND BLINDNESS. INHALATION: SEVERE IRRITATION, POSSIBLE
PERMANENT DAMAGE TO UPPER RESPIR ATORY TRACT. INGESTION: SEVERE
IRRITATION, POSSIBLE PERMANENT DAMAGE TO GASTROINTESTINAL TRACT.
First Aid
First Aid:EYE:IMMEDIATELY FLUSH WITH WATER FOR 15 MINUTES, HOLDING EYE
LIDS APART. SKIN: FLUSH WITH ATER TILL THE SLIPPERY FEELIN IS
COMPLETELY GONE. INHALATION: REMOVE TO FRESH AIR, ADMINISTER
OXYGEN IF BR EATHIN IS DIFFICULT. INESTION: DO NOTINDUCE VOMITIN.
IF VICTIM IS CONSCIOUS, DILUTE BY GIVING LARGE VOLUMES OF MILK OR
WATER. NEVER GIVE ANYTHING BY MOUTH TO ANY UNCONSCIOUS PERSON.
Fire Fighting
Extinguishing Media:USE PROPER MEDIA FOR SURROUNDING FIRE.
Fire Fighting Procedures:USE SELF-CONTAINED RESPIATORY PROTECTION.
Unusual Fire/Explosion Hazard:CONTACT WITH REACTIVE METALS, SUCH AS
ALUMINUM, ZINC, TIN, ETC. MAY LEAD TO GENERATION OF HYDROGEN GAS
IN EXPLOSIVE AMOUNTS.
Accidental Release
Spill Release Procedures:CONFINE SPILL, STOP LEAK, VENTILATE AREA,
EVACUATE AREA. PUMP LIQUID INTO DOT APPROVED DRUMS FOR DISPOSAL.
ABSORB REMAINING LIQUID ONTO INERT ABSORBENT AND PLACE IN
DOT-APPROVED DRUMS FOR DIPOSAL. WASH AREA WITH WATER.
Exposure Controls
Respiratory Protection:FOR MIST CONDITIONS. UE A NIOSH-APPROVED
RESPIATOR FOR MISTS.
Ventilation:MAINTAIN SUFFICIENT MECHANICAL VENTILATION TO KEEP
CONCENTRATION BELOW TLV.
Protective Gloves:NEOPRENE
Eye Protection:GOGGLES/FACE SHIELD
Work Hygienic Practices:WASH HANDS AND FACE WITH SOAP AND WATER BEFORE
EATIN OR SMOKING.
Supplemental Safety and Health
PH IS 11-13 FOR 3.1% CONC.
Chemical Properties
HCC:B1
Boiling Pt:=101.7C, 215.F
Vapor Pres:25 MMHG
Vapor Density:<1
Spec Gravity:1.07
Evaporation Rate & Reference:>1 BUAC = 1
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR LIGHT AMBER LIQUID
Percent Volatiles by Volume:85
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, REACTIVE MATERIALS, AND ORGANIC MATERIALS.
Hazardous Decomposition Products:NONE KNOWN
Disposal
Waste Disposal Methods:1. TRANSFER TO RECLAIMING CENTER FOR RECYCLING.
2. TRANSFER TO LICENSED WASTE TREATMENT OR DISPOSAL SITE UNDER
REGULTIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.